| |
|
Buy 1 yard of a print fabric that will compliment your kitchen and
1 yard of solid complimentary fabric.
Light weight very low loft fiberfill
Cheese Cloth
Fresh potpourri of your choosing.
Cut print fabric into various sizes from 12” X 12” to 14” X 18”.
Cut 2 layers of solid fabric to the same sizes.
Cut 1 section of the fiberfill to 1 inch smaller, in each direction, for each of the print fabrics you have.
Place the fiberfill and the print fabric together so that the print fabric is right side up and quilt, horizontally
and then vertically, in even rows 1” apart
Place the two solid 12” X 12” pieces of cloth on the table.
Place the print 12’ X 12” piece of print cloth right side down on top of the solid squares.
Stitch all the way around leaving a 4 “opening for turning your work right side out.
With the two solid squares in your left hand and the print square in your right hand turn the square
right side out.
Whip stitch the opening between the print and middle solid fabric closed.
Hem the outer solid fabric at the opening.
Place a small amount of the potpourri in the middle of a 6” square of cheese cloth and tie closed.
Place the potpourri pouch into the opening in the hot pad.
When you place a hot kettle or hot plate on the hot pad the heat from the dish will activate the potpourri
and add a wonderful scent to your dinning room.
To change the potpourri simply remove the pouch and replace with a fresh pouch. |
|
|